News of SimRacing-Rigs (cockpits)

As per request by Hunt a little picture show of my current setup and how it works.

Im running 3 dell screens with Soft TH v2.08
From AMD 6950 2GB, this card has 2 DVI out's and 1 mini dvi out. With an active display port to DVI to run the 3d screen.

Setup:

AMD 6950 2gb edition

Centre screen Dell 2007 WFP (1680X1050)

2 side screens Dell 1707FP's (1280X1024)

Display port ...

Here is some thing that would be nice to find under the tree...
SimXperience Prices
6e66o just got one.
Maybe Ray could give us some opinion.

DIY screen surround inexpensive to build.

We are not so cheap Nvidia 3D Vision glasses and the 3D projector, but the end is really rewarding experience and you forget the Paston that as released by all: D, at least in my case.

Well, first let's start with the materials used

Nvidia 3D Vision Glasses

Acer X110 Projector (here I bought this projector for the lack of information and because it is the cheapest I found, ...

And yes please, let me know your thoughts on wheels & pedals, I would appreciate it! Also about force feedback; is that an advantage or just more real? My TSW is from days when there was no FFB....... :oops:

Greetings

Ok, here we go..

Wheels and pedals...

First of all, a good set of FFB wheels and pedals are going to make you faster mate, ...

Well, this is what I did on my birthday...

http://www.varjanta.net/happy_birthday.htm

For the DIY people...

http://www.x-simulator.de/beta/downloads/X-Sim-2-Introduction.pdf

and some results...

http://www.x-simulator.de/wiki/Tacho_Controller_by_Elektronikjack
and
another
...

Well finally finished my hydraulic brake pedal. :cheers:

I did it all with original car parts.

These are materials that use



The master cylinder is Renault Gordini and The brake caliper is a Ford Fiesta.
Then use teflon for Load cell, copper pipe, cut sheet metal and springs.

First adjust the pump to the G25 pedal




After the two cuts prepared to work the ...

This is dedicated to my friend Uncels, which I know he likes all these little things. :D

Seeing that in the Tin Cup Top Mosler, these cars work with sequential shifter, and my part is very difficult to make good times with my shifter H.
I decided to make a sequential shifter.

Searching XtemeRacers forums (which for me is the best Spanish site dedicated to SimRacing) ...

http://www.simracingstation.com/GB/SRS_GB.html

COMPLETE KIT:

- pedals extensions
- second spring for brake
- rubber for brake
- spacer blocks for brake
and clutch
- key and bolts

29 EUROs
(40 US DOLLARS)